FREE UK DELIVERY FOR ORDERS OVER £50 | FOR INTERNATIONAL DELIVERY PLEASE CONTACT US ON 01395 273248

Gorilla Epoxy Crystal Clear 25ml
Gorilla Epoxy Crystal Clear 25ml
Gorilla Epoxy Crystal Clear 25ml
Gorilla Epoxy Crystal Clear 25ml
  • Load image into Gallery viewer, Gorilla Epoxy Crystal Clear 25ml
  • Load image into Gallery viewer, Gorilla Epoxy Crystal Clear 25ml
  • Load image into Gallery viewer, Gorilla Epoxy Crystal Clear 25ml
  • Load image into Gallery viewer, Gorilla Epoxy Crystal Clear 25ml

Gorilla Epoxy Crystal Clear 25ml

Vendor
Gorilla
Regular price
£9.50
Sale price
£9.50
Regular price
Sold out
Unit price
per 
Tax included. Shipping calculated at checkout.

  • Dries crystal clear

Ideal for clean, easy finishing.

  • Gap Filling

Fills voids and bonds uneven and vertical surfaces.

  • 5-minute set time

Gives ample time to reposition for the perfect fit.

  • Water resistant

Withstands moderate exposure to water.

  • Easy-to-use syringe

Separate barrels of resin and hardener keep epoxy from hardening. Syringe dispenses evenly and includes a cap for multiple uses.



How to use
PREPARATION

All surfaces to be bonded should be clean and dry. To improve adhesion, roughen smooth surfaces with sandpaper before gluing. Ensure your work area is well-ventilated and protected from spills.

 

Remove stir stick from middle of plunger. With nozzle pointing upward, snap the sealing cap off the syringe then eliminate any air by slowly pushing plunger until resin and hardener reach the tip.

1. DISPENSE & MIX

Dispense resin and hardener onto a clean, disposable surface until they are both flowing equally. Even amounts of the resin and hardener can then be dispensed into a disposable mixing tray.

 

The package blister can be used as a mixing tray for the first use. Stir the mixture for at least 20 seconds, until it is uniform. As you mix, you will notice that the epoxy warms up – this is a reaction that occurs as the resin and hardener combine.

2. APPLY

Apply mixture to surface within 5 minutes. Bond strength will decrease the longer you wait to apply. Remove any excess glue immediately from project surface with a dry cloth.

3. GRIP

To achieve maximum bond strength, clamp surfaces together and leave undisturbed for 30 minutes.

 

Full cure achieved in 24 hours.